Infill Swatches v2

V2 of my Infill swatches, now much quicker to print and easier to store!

 *** Now includes top and bottom fill pattern swatches! ***

Great for a quick reference to each of the infilled types in PrusaSlicer.

A swatch for each of the infills with the exception of Adaptive Cubic and Supportive Cubic as these require models with different geometry to be apparent.

See the Prusa blog on Infill Patterns for technical details about each infill type 

Print instructions

Quality: 0.2
Material: PLA

The pre sliced gcodes come in a single colour or with pauses for a colour change after the first 2 layers.

I would recommend using a bright colour for the main body of the print as this shows up the sometimes subtle differences in the infill types. I had printed in black and realised its not the best for this swatch. I did a second colour change on the final few layers to help show the difference in infills but this is not included in the pre sliced gcode.

You might want to print slowly on the first few layers. The text on these objects is orientated towards the build plate and the print will fail if you don't have a good first layer. 

Make sure your z-height is correctly calibrated and print slowly on the first layer or two if you have problems with the text not coming out right. 

Each Infill Swatch has its own modifier which removes the top layer of the swatch.
When dragging the swatch you want to slice onto the print bed, make sure its modifier goes along with it.

Files

• Gcodes for all swatches with colour change pause
• Gcodes without a colour change for single colour swatches. 
• 3mf files for you to slice and print what you want.