Mod Wing 17mm spacer

Mod Wing on my holster shipping with 2 spacers, one 10mm and one 14mm and I felt that some more depth would be better, so I modeled a taller one that is 17mm.

The gcode file is with supports and Prusament PETG 100% infill with .15 layer height. Takes about 43 minutes to print. I use 3 permiters in the print.

I think printing it as the .3mf file is oriented is the best way to minimize the chance of breaking. Rev 2.1_long reflects this.

Rev 2.1: Cleaned up spacing of locating pins, and increased radius of corners from 2mm to 2.5mm