Lidl Glider Pusher Power Pod

Lidl Glider Pusher Power Pod

Designed for 12 x 12 mm M2 hole mount.
I used a Racerstar Racing Edition 1806 motor with a 4" prop.

Designed to be printed with no supports. To make it stronger, print at a higher temperature.
V2 is for motors shaft that stick out past the motor base.

For the 12 x 16 mm mount
https://www.thingiverse.com/thing:5585789

For the 16 x 19 mm mount
https://www.thingiverse.com/thing:5624386

My set-up
3S 1000mah lipo
3 x 5 gram servos
3 bladed 4 inch prop
Racerstar Racing Edition 1806 75 watts at full power
25a ESC
All up, weight 320g

Flight video https://youtu.be/dKA-KWGKGeA

Print Settings

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

20

Filament: ESUN PLA + orange

Notes:

Printed at 215 degrees

Category: R/C Vehicles