May 15, 2026
Description
I have the 500mm sized rat rig vcore 3.1. The z axis rods have a tendency to start whipping when the bed is lowered very far, so I thought I would make some caps to help prevent this. These should fit on any sized V-core 3.1 printer. I used 608-2RS bearings off of amazon that get pressed in.
The rear rod support has 2 different sizes. I made one that is meant for ~M6x10mm, but all I had was 16mm long ones so I made a second size for longer bolts. The left and right brackets use the two bolts that are already there for the corner bracket.
https://www.amazon.com/gp/product/B07R7PR72H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
License:
Creative Commons — Attribution
7
rpuckett
