LCD Cover with reset button alternatives.

Description:

For me the X never conveyed the panic I felt when I needed to hit the reset and stop my printer from making an even larger mess. So I decided to make one, then one turned into a few more. So there's a few options, I have even uploaded the blank one if you do not want anything there or want to remix it with something else.

Printing:

If you do not use the print files I uploaded make sure to put the face of the LCD cover down on the bed, or you'll have a bad time. I printed it with Formfutura rPET at .20mm layers with a .4mm nozzle, however I uploaded the .10mm layer version as I think that will preserve the detail a little better.

Installing: Make sure you remove the supports on the SD card slot and where the LCD PCB clips in. Here's the part in the assembly manual if you need help: https://help.prusa3d.com/guide/6-lcd-assembly_172423

Happy printing!

Knob by Jeroen P can be found here:https://www.printables.com/model/25557-lcd-knob