Subaru Outback BP turn signal connector dust cover

I have bought white/yellow WY21W switchbacks for DRL on my 06 Outback. I do not like to see connector unprotected or covered by electrical tape. So I made simple cover that also hold resistor (M3 screw) and could by mounted with M6 bolt or ziptie. Hole for wires is sealed with hot glue / silicon sealant. On left side I had some empty holes on bracket behind batery so I could mount it with screw. On righ side I had to mount it with zip tie on back side of bracket between headlight and airbox.

Print Settings

Printer Brand:

Anet

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament: PrintWithSmile PETG Gray

Category: Automotive