October 10, 2022
Description
The hinges on the door of my 30 year old ABB Vynckier fusebox broke and needed replacement.
One part of the door still has the original rod to clip into (part 1) and the other one was broken too so I designed a new complete hinge (part 2 and 3). Both hinges should swing around the same centerpoint so the door opens evenly. When installing / gluing, consider the orientation of the bottom part so the protrusion point upwards and your door does not fall down when opening :)
Hole is sized for a self-tapping screw to fix the hinge into the fusebox.
Printed in PETG because PLA proved to be too brittle when snapping the hinge in place.
License:
Creative Commons — Attribution
vanhee_sander
