Tightener Knob for Square Jellyfish Tripod Mount
astrophageOctober 12, 2022
Description
10.10.22 Update: Added a second version were the nut in inserted to the print part way. This avoid any gluing and results in a clear print. It also had chambered edges to make tightening less painful.
I have used the Mini Tablet Tripod Mount from Square Jellyfish for several years and been really happy with it. Last week after a camping trip, I lost the screw knob that tightens the mount (see image below).
Went to Home Depot and picked up a couple M4-0.7mm Hex Nut for $2 and modeled a new parametric knob in OnShape based on my memory and reference pictures I found online. A small dollup of super glue to secure the nut and I'm back in business.
WARNING: If using glue, make sure to use a small amount of super glue otherwise you risk getting it in the threads of the hex nut.
Print Settings | |
|---|---|
| Printer | Prusa Mini+ |
| Brim | No |
| Supports | No |
| Nozzle | 0.6mm Brass |
| Resolution | 0.40mm DRAFT |
| Infill | 100% |
| Perimeters | 3 (for added strength) |
| Filament | Inland 1.75mm Red PLA+ |
Assembly: Materials & Tools | ||
|---|---|---|
| Hex Nut | $2 | M4 - 0.7 Stainless Steel Metric Hex Nut (2 per Pack) |
| Super Glue | $6 | Gorilla Super Glue Gel |
