Gridfinity cups height 11 (81mm) collection

Collection of Gridfinity basic cups height 11 (81mm), over 2500 STLs all common variations.

Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).  

This will hopefully allow people to grab the size and config you need without needing generate it yourself. The OpenSCAD script is really flexible and all configurations can't be included here. If what you need is not here please make a suggestion, or check the OpenSCAD script.

Options that have been included:

• Height: 11 (77mm+4mm)
• Widths: [0.5, 1, 2, 3, 4, 5, 6]
• Depths: [1, 2, 3, 4, 5, 6]
• Chambers: [1 - 6]
  • Width * 2 up to 6, min width of 0.5 (21mm)
• Label: [off, on, left, right, center]
  • Left and Right for 1 chamber, Center for 1 and 2 chambers.
• Fingerslide: [on, off]
• HalfPitch: [on, off]
• EfficientFloor
  • Fingerslide and HalfPitch off, MagnetDiameter and ScrewDepth =0
• MagnetDiameter = 6.5
• ScrewDepth = 6

In total that results in 2580 different models per height.

2580 are to many STLs to attach all of them directly, it breaks the page. You can download them all from the attached zipfiles, or the more common single chamber models are also uploaded for individual download.

Other Heights:

• Height 2 (14mm)
• Height 3 (21mm)
• Height 4 (28mm)
• Height 5 (35mm)
• Height 6 (42mm)
• Height 7 (49mm)
• Height 8 (56mm)
• Height 9 (63mm)
• Height 10 (70mm)
• Height 11 (77mm)

These bins were generated using the OpenSCAD model maintained by Jamie. 
If you use these please go show Jamie some love. Link to model on Printables

Fun note, the STL's take on average 8mins to render in OpenSCAD. 2580 models took just over 14 days of render time.