K-Edge Front Mount Extension

After using my previous version of the extension outdoors, the quarter turn isn't robust enough to handle the rough, bumpy roads. I decided to modify it by moving the insert and use a couple of M3 screws to mount it directly. Feels much more solid and will share the results from trying it outside.

There are two versions. One with holes for the vertical/portrait orientation, and the 90deg version that can do either vertical/portrait or horizontal/landscape orientation.

Current pictures are of an initial design and will update the pics with the changes I made in the uploaded STL once printing is completed.

I needed some M3 screws and M3 nuts mount the extension and insert.

Once I get the bottom half off (screws are currently stuck), I'll design other options that I have in mind (battery pack, gopro mount etc.)

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.32

Infill:

Filament: Generic PETG Black

Category: Sport & Outdoors