Tub Drain Removal Tool for 38mm Opening

I needed to replace a drain as the shield on mine kept moving and coming off. I found the tool made by jnads was too big for my drain to I remixed it a little smaller (to 38mm) and the openings at the bottom was a little smaller than the diameter of the tool.

I also had a 30mm 1/2" drive socket so that's what I have as the hex at the top and was used to remove/install the drain.

It worked well and just putting it out there in case someone else has a similar drain as mine.

I printed mine in PETG with the same settings (5 perimeters and top/bottom) as jnads.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.32

Infill:

Filament: Unknown PETG Black

Category: Hand Tools