October 11, 2022
Description
I really liked the thing from terenceang (https://www.thingiverse.com/thing:3293821) as I already had a lot of the things needed for this. However it was for the stock hotend and I have a E3Dv6 Clone on mine.
I didn't want to mount it on the right as I wanted to measure most of the bed. I modified the mount to clear the endstop and still mount on the left.
As for configuration/firmware changes, terenceang works if you have the stock board. I do not have the stock board anymore and running a MKS GEN L board and majority applies.
Current pictures are of the last prototype before finalizing the design. Will take better pictures of the mount when I get a chance
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
25
Filament: ColorMe3D PETG Blue Post-Printing =============
Mounting
To mount it, you'll need to remove the top left wheel as it utilizes the screw as one of the mounts. You'll also need the another screw to mount it when the stock hotend cover mounted.
License:
Creative Commons — Attribution
7
Monkichi57
