October 11, 2022
Description
READ THE WHAT TO PRINT SECTION AT THE BOTTOM
READ ALL OF THIS SUMMARY
This machine is designed to rapidly intake or expel air from a room. It is designed for use with 150mm fans, particularly the SanyoDenki San Ace 150. The tube parts are designed to fit a 4-inch tube.
Use a combination of the parts provided. Intake / exhaust mode can be determined by the direction the fan is inserted. Drill a hole in one corner of the fan enclosure, to allow the fan wire to come out.
In addition to the main machine, it also has parts for using a tube and/or mounting it in a window.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: Overture PLA / ABS / PETG Black Post-Printing =============
How to assemble
Drill a hole into the Fan Enclosure
Insert the fan into the Fan Enclosure, putting the wire through the hole you just drilledAdd Couplers on either side
Add Fan Vents or Tube Adapters as needed
Hold it together with sticky glue or hot glue
Seal it with duct tape, make sure to cover the wire hole!
For indoor use
Fan Enclosure
Coupler
Coupler
Blower End (Fan Vent or Tube Adapter)
Blower End (Fan Vent or Tube Adapter)
Tube End (Radial - RadialSquare - BoxRadial - BoxVent - None, if not using tube)
For window use
Fan Enclosure
Coupler
Coupler
Blower End (Fan Vent or Tube Adapter)
Blower End (Fan Vent or Tube Adapter)
Window Mount Part 1
Window Mount Part 2 (As many as needed to fit your window)
Example configurations
Circulation - 1x Fan Enclosure, 2x Coupler, 2x Fan Vent
Circulation with tubes - 1x Fan Enclosure, 2x Coupler, 2x Tube Adapter
Exhaust / intake - 1x Fan Enclosure, 2x Coupler, 1x Fan Vent, 1x Tube Adapter
Included Parts
Fan Enclosure - The part containing the fan.
Coupler - Connects the 150 mm Fan Vent and Tube Adapter pieces to the larger Fan Enclosure.
Tube Adapter - Used to connect the main machine to a 4 inch duct tube.
Fan Vent - Used as a direct intake / outlet vent.
Tube End Radial - Keep debris out of your tube with this low-profile grate.
Tube End RadialSquare - Same as above, but with a square rim to make mounting easier.
Tube End BoxRadial - A rectangular box that can be used as a decorative finish for your tube.
Tube End BoxVent - A rectangular box with angled slats that can be used to direct the airflow out of your tube.
Window Mount Part 1 - Contains a tube connector and a flat piece.
Window Mount Part 2 - Contains two flat pieces.
Window Mount Tube Connector - Connects your tube into a window.
Window Mount Flat Piece - Blocks the rest of your window so air can't get back in.
Planned parts
Tube setup
Tube Connector - Connects two flexible tubes together
2WC90 - 2 Way Corner part, connect two tubes at a 90 degree angle
2WC60 - 2 Way Corner part, connect two tubes at a 60 degree angle
2WC45 - 2 Way Corner part, connect two tubes at a 45 degree angle
2WC30 - 2 Way Corner part, connect two tubes at a 30 degree angle
3WT - 3 Way Tee part, connect two tubes to one perpendicular
3WI - 3 Way Intersection part, connect three tubes intersecting
3WY - 3 Way Splitter part, split airflow from one tube into two
3WC - 3 Way Corner part, connect three tubes to one at an angle
4WI - 4 Way Intersection part, connect four tubes intersecting
4WT - 4 Way Tee part, connect two tubes to two perpendicular.
4WY - 4 Way Splitter part, split airflow form one tube into three
5WI - 5 Way Intersection part, connect five tubes intersecting
5WP - 5 Way Perpendicular part, connect four tubes with one perpendicular
6WI - 6 Way Intersection part, connect six tubes intersecting
6WP - 6 Way Perpendicular part, connect four tubes with two perpendicular
Dampers
Tube damper - Control the airflow through a tube
Fan damper - Control the airflow from the fan
Grilles
Basic Single - Single direction vent, direct airflow in one direction
Basic Double - Double direction vent, direct airflow in two directions
Basic Quad - Quad direction vent, direct airflow in four directions at once
Adjustable - Adjustable vent
One-way - A one-way vent that opens when air is flowing one way but closes the other way
Some assembly and setup ideas...
Use multiple hoses together for a longer reach
Chain modules together for more power
Place it in a window
Use it to pull cold air from the basement
Use it as a soldering / painting / anything fume extractor
Use it as an air conditioner
Use branch pieces (coming soon) to branch out in multiple directions at once
Use tube ends to create a vent system
Build a crude vacuum
Use it as a leaf blower / sucker
And lots more
License:
Creative Commons — Attribution
SparkLink Development
