The Frankenstein Swing Set

Get ready to family friendly Halloween with one of the great classic movie monsters: the Frankenstein Swing set!

Here we have legend himself lending a helping hand (or arms) to some of the local creatures of the night for a midnight swing ride. This decorative sculpt has a detailed yet cartoonish looking facial features, stands almost at 12" tall, twistable hands, and full motion swinging action. It is a must have for all the little trick-or-treaters to further enjoy and get into the spirit of Halloween.

If you like this print, please visit my Facebook page to see my other 3D sculpts and Prints:
Scenestruck Art | Facebook

Let me know if there are any problems with the model. Constructive feedback is always welcome.

Notes:

• FDM only print (Large pieces).
• Ignore any non-watertight warnings in slicer.
• The "Legs" should be printed at a denser infill (25-30% or more) to keep steady when swings are in motion. Another option is to secure tightly to a base (glue, screws, etc.)
• Recommend printing the "Head" upside-down, although it is not a flat surface, so support is still needed.
• The "Iron Rings" are twisted onto the arm and into position. If you can't, I recommend adjusting the size up by .1mm scale (not scale %). Same rule applies for the "Pegs" whether they're too loose or too tight (current scale works for me, so I apologize in advance if you waste filament on printing a second time).
• Most parts should be glued together.