Axial 3 gear transmission to modify

Updated this with standard mounting holes. The body is 2mm thick, it's too complicated for me to print, and no idea how strong it is.

Also made it look more like the original.

axial 3 gear ax10 transmission in 3d, no mounting points you have to learn fusion 360 and add your own, but it works, probably.

solid fusion 360 file link https://a360.co/2JhriQU

This uses the standard guts from any standard axial 3gear transmission (ax10 derivatives, wraith or non kit scx10)

Video here https://youtu.be/UCsaEiKbQSU

My printer over extrudes or something so I might have made the bearing holes too big for some people. Simplify 3d can make stuff fatter to fill it in. I don't know if other software does this. I use a rotary tool and drill bits for some of the holes probably.been a while since i printed this so I don't remember.

Just thought some one might like it, but it needs mounting brackets, I was going to use it to make a built in transmission for my Hotrod, but you could make a forward transmission that links to a transfercase or somthin, maybe build the transmission into a skid, skys the limit!

The final output gear might be a hair too close the the idler gear, or maybe my plastic gears are just bad, but I get a tiny bit of tight feeling on each rotation of the output gear.

Category: R/C Vehicles