Prusa Mini Light Holder

A LED light holder for The Prusa Mini

This attaches to the back 3030 Z axis post.

** Mount at very TOP to Avoid interference with stepper motor and cable ***

Uses The 3030 Latch 4-11-2020 found:
https://www.prusaprinters.org/prints/29349-3030-latch-4-11-2020

The LED Light I purchased at Home Depot
Brand: Commercial Electric #1000 468 981 White
I paid about $12.00 for three. The use 3 AAA batteries

Print instructions

I screwed the back plate into the part. The lip of the part is flush with the light so I have to apply downward pressure with the palm of my hand to turn and lock the light in. If you have a rubber jar opener pad that will help. You can also use the 3M double back tape pad that comes with the kit to attach the back plate.

To Print, have the back of the light flat on the build plate.
For supports, I would suggest one of these options:
1) Select 'Support on build plate only"
2) Select 'For support enforcers only'
(see screen shots)

Please See this link for the attachment /screw I used:
https://www.prusaprinters.org/prints/29349-3030-latch-4-11-2020