March 23, 2023
Description
120x120 mm softbox for a Godox v860II flashlight.
The design comes in three parts: the box, the frame and the diffuser. You can use a tissue (Kleenex), a white nylon fabric, one or two layers of tracing paper, white baking paper works well too. You can also use light gels if needed.
Use the frame as a guide to cut the diffuser with scissors. The frame clips the fabric to the lightbox.
The inside of the lightbox can be layered with a reflective tape. The resulting benefit is marginal, though.
Printing recommandations:
PLA or PETG
0.3 mm layer height
License:
Creative Commons — Attribution — Noncommercial
cewo
