Micro SD Card Wallet - less than 4 mm thick 3D Printer File Image 1

Micro SD Card Wallet - less than 4 mm thick 3D Printer File Image 2

Micro SD Card Wallet - less than 4 mm thick 3D Printer File Image 3

Micro SD Card Wallet - less than 4 mm thick 3D Printer File Image 4

Micro SD Card Wallet - less than 4 mm thick 3D Printer File Thumbnail 1

Micro SD Card Wallet - less than 4 mm thick 3D Printer File Thumbnail 2

Micro SD Card Wallet - less than 4 mm thick

cewo

December 26, 2025

Description Comments Tags

Description

Micro SD Card Wallet
Holds 16 Micro SDs and 1 standard SD card.
The tray contains the clipped in cards covered by a sliding lid.
Dimensions: 58 x 99 x 4 mm

Printing recommandations
PLA
0.3 mm layer height
4 perimeters, arachne mode is not needed (0.4 mm nozzle)
no infill
no supports

Update 20230807
This model is optimised for PLA, it needs to be scaled by 101.5% when printing with PETG.

Update 20230808
It seems that only Prusa PLA works out of the box.
It is recommended to print a test with your filament before. The micro SD card should fit into the tray without applying too much force. You may scale the model. 101.5% works fine with my PETG Prusa filament.

Update 20230811
Added a version optimised for Fillamentum PLA (v31).

Standard SD card wallet:
https://www.printables.com/model/1009490-sd-card-wallet-less-than-4-mm-thick

License:

Creative Commons — Attribution — Share Alike