January 18, 2024
Description
So here it is I was finally able to download it.
everything should fit nice and snug if your printer is dialed in well.
When you put the wheels on put the one wheel on one side then feed the axle through making sure you put glue inside the shaft of the wheel and there is no glue on the outer circle of the inside of the wheel so it can roll freely. Hold the wheel flat against the chassis and push the axle all the way into the wheel. When gluing the other wheel again make sure the glue is only in the shaft of the wheel but not to much to ooze out. It's tight but put the axle in the spoke of the rim then slide it in and repeat holding the wheel against the chassis to ensure the wheels roll strait.
Everything else again should slide right in. I have 8 of the Erwin mini clamps to clamp down for gluing they work awesome. Amazon link for the Erwin Clamps: https://a.co/d/8RlmYN9
Please be sure to make this a favorite and post some pics ENJOY!!!
STL is not to be sold or duplicated without authors consent.
If you'd like to leave a tip: PayPal.Me/3DCopper
License:
Creative Commons — Attribution — NoDerivatives
3D Copper
