Mouse mover for M650L (maybe others)

Wanted to make something using heat set inserts so I tried with this simple thing. I printed in PETG+ 0.6mm Nozzle, 0.30LH since I had extra filament around, probably fine in whatever. 

Inventory: 

• Clock movement:  (https://www.amazon.com/dp/B09Q11KHBX)
• Heatset inserts (standard Voron size)
• M3x6mm BHCS

Areas for improvement: 

• Base is a little too tightfitting.
• “Passthrough” for screws, past inserts, not wide enough so longer screws don't work well.