October 13, 2022
Description
Wanted some anti-vibration pads under my Lack so I made a nice-ish looking transition for the leg to enclose a pad.
The pad used can be found here: https://www.amazon.com/gp/product/B00BVEMLR4
I cut the thing into shape using a chop-saw, so if you have one hand it would be helpful. Used superglue to fasten the pad to the plastic piece.
Notes on printing
Pad was printed as shown in the model, I printed in ABS and I needed helper disks on each of the 4 edges to aid in adhesion. You could also add a brim. Bridges weren't an issue.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Ed Yu
