EDC Micro Tools II (Magnetizer, Demagnetizer, Brush, File)

EDC Micro Series. Compatible with each other.

See also:

• EDC Micro Knife - Keychain (Scalpel)
• EDC Micro Pill Capsule - Keychain
• EDC Micro Screwdriver
• EDC Micro Tools I
• EDC Series Box

• Continuation of the series. EDC Micro.
• The same capsule or twice as long.

Micro tools included

• Magnetizer - Diameter 5 mm, thickness min 2.50 mm. Turn the polarity correctly.
• Demagnetizer - Diameter 5 mm, thickness min 2.50 mm. Turn the polarity correctly.
• Brush - I used the bristles of a toothbrush. Taken out with forceps and put on glue
• File - Use a strip of sandpaper 60X 4 mm and glue.

Properties

• The most important property. The cover remains on the paracord after unscrewing it.
• Small, comfortable grip.
• Hex Shank Dia: 7.00mm, not for a screwdriver bit.
• Only 12.5mm in diameter.
• Length 53mm.
• Long version 93mm
• 4mm paracord hole.
• Right-hand thread. M11.
• Long version for a better hold

Version

• E - With an EXTENSION from the cover
• L - LONG capsule
• H - HOLE version, extension + hole in grip

Print

• No support. PLA 5g.
• Grip: Grip down printing recommended.
• Cover:  Print hole down.