Low Profile VESA Wall Mount

Originally needed a low profile VESAmount that would allow me to mount my magic mirror on the wall to use as a dashboard. Most of the ones I found were either too close or too far so I created one that will sit close to the wall but still allow a raspberry pi to be placed behind the monitor. Total thickness of the mount is 0.76 inches.

Print Instructions:

Layer Height: 0.2mm

Walls: 3 (add more if your monitor is heavier)

Infill: 20%

Material: PETG (can be whatever you print but mind the strenght and weight of the item you are mounting)

Support: Yes

Additional: Please look at the last images to see the print orientation that will use the least amount of support.