Bed Clamp

After shooting binder clips all over the room repeatedly, I decided to make a low profile clamp to keep the print head assembly (fan bracket really) from hitting the binder clips and keep as much build space as possible.  I tried a couple of iterations with screws to clamp the sheet down, but I didn't like the effect of the screw on the under side of the plate.  I made a shoe to mitigate any marring, but that made the whole assembly bulkier.  I settled on measuring the total thickness of the bed stack and printing the clamp to accommodate.  Works like a champ.  They may soften and give over time, but they do the job for now and cost me a couple of hours of print time to replace.