Flat SD card holder with double-sided slide.

Flat Card holder for full size SD Cards.

Was intended to be used as storage for use with a camera that only supported full size SD cards. The drawer is centered at rest by means of a small notch. When pulled out, the drawer is blocked at the end so that the drawer cannot fall out. A hole is provided at each position to easily push out the various SD cards from the bottom. To assemble: place the carriage in the bottom part. Make sure the cam falls into the recess. Then glue the cover at the four pins. (The images of the moon are stickers that were later placed on top).

Older model, designed 05-2022