April 17, 2020
Description
Ideal to go shopping in the store and have enough spare gloves during these days of quarantine.
It is printed in two parts and a cardboard tube of toilet paper is reused. The first part is the container/dispenser structure and the second is a cap. Both parts require the use of supports during printing, nothing impossible to achieve!
Using a cardboard toilet paper tube allows this product to be replaced by a new one and contribute to the reuse of disposable items. The parts printed in PLA can be washed with soap and water to disinfect them. A rectangle cut must be made to fit the dispenser feature (60mm x 20mm).
A strap can be added to hang the container from the neck during purchase in the store or in the usual routes allowed during quarantine.
It is recommended to frequently change the cardboard tube and fully wash the plastic parts.
Enjoy it!
Print with PLA.
Supports: required (easy to print & remove) (both parts)
Layer Height: 0.2
4-5 hours (2 parts at a time).
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Pepo Aliaga
