November 13, 2022
Description
This is a goodman handle designed for the XTAR D26 diving flashlight - it may also fit other models.
You will need an M6x20-22 stainless steel bolt and a spring washer.
You will also need some 4mm bungee cord.
I prefer to print it with ~5 perimeters.
Handle was tested in water and it wirks great. Any ideas of improvement are welcome!
I am not responsible for any lost flashlight or damage, You are using this handle at your own risk.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
QuickLazyOrange
