Kärcher to Dust Commander DLX Adapter

This adapter connects a Kärcher hose connector (e.g. from WD-series) to the Dust Commander DLX cyclone.

Print Settings:

• Filament: PETG
• Infill: 20 % Gyroid
• Layer Height : 0.3 mm (with variable layer height)
• 2 Walls (perimeters), 4 Top, 3 Bottom

This is based on the Kärcher coupling by RickHuisman on Thingiverse:

http://www.thingiverse.com/thing:3351171