Prusa MINI USB Sleeve

Print this very slowly! This print is tiny!

I came up with this design to help me tell apart the USBs Prusa printers come with. Just print these in different colours! Additionally the design has a notch that will help you insert the drive first-time, visually or by feel. Make it out of your favourite colours!

Technical recommendations:

• Layer height - 0.2mm
• Nozzle size - 0.4mm
• Print speed - under 10mm/s for the entire print
• If the print doesn't fit, you can try scaling it ±1-5% in the X and Y axis.