Magsafe continuity camera screen holder (iPhone)

This is a magsafe continuity cam mount. When not used it almost disappears behind the screen.

You need a magsafe magnet (or wall mount) to be inserted in the mount.

I used this one: https://www.amazon.de/gp/product/B093PL1CD8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 (outer diameter: 56mm, thickness: 3.75mm)

It has to be glued to your screen (I know: maybe thats not the best solution. Please send me recommendations for other methods to mount it on a screen. I can't use the top because I have a screenbar lamp installed there).

I used hot glue because it can be removed relatively easily and without leaving any residue. It should work on curved monitors as well. You could use washable double-sided tape as well.

It's angled to be mounted at one specific side of the screen:

15° to the center of the screen

5° to the desk to enable desk view

The little dot on the back indicates the top part.

The side in the file name assumes that you are looking at the screen from the front.

Print Settings

Printer Brand:

Anycubic

Printer: 

All-metal Mega

Rafts:

No

Supports: 

No

Resolution:

0.3mm

Infill: 

20%

Filament: dosen't matter PLA black