December 14, 2022
Description
the spacers must be cut to fit the orbiter stepper motor;
it is designed to put the M3 4.6mm diameter brass inserts:
I left a hole to display the led of my USB Type C;
the possibility of fixing it with three screws to the EVA 3 support makes the fixing more stable;
there are three steps for the cable ties and then to fix the cables.
I've included a mount for a 30x30mm fan; to be connected perhaps with a Y cable with the hotend fan and to cool the components of the EBB36 board.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Aldoale
