Hydrofoil Front Wing for SABFOIL Fuselage

925cm width, area about 1400cm2.
I used Tom Speer's H105 airfoil section profile.

Do not use Bed Leveling, because it deforms parts and then it is difficult to join. I use raft 3 layers.

When joining the parts, I put 3 layers 250g/m2 carbon on the long side
In the bolt holes I put a mixture of epoxy resin, fine sawdust and chopped carbon.
Then I drilled the bolts openings.
Finally, I flooded 4 layers 250g/m2 carbon, with a vacuum bag.

It's nice to ride, it wants a little more pump than W945, but then slides easier, and it's a little faster. It is good for waves.

Because it has 2 deg. more angle of attack,  it needs 1 or 2 deg negative shim.