January 9, 2026
Description
Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools.
The NEW Das Filament1 kg Masterspool: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill
Old MasterSpool - DAS FILAMENT Edition V3.2: https://www.printables.com/model/10364-masterspool-das-filament-edition-v32
A print setting to print the DAS FILAMENT MasterSpool with a cool hexagon look and reduce the filament needed. An infill ration of 14-20% is recommended. To ensure that the logo and labels stick well to the sparse infill, 2 layers of bottom infill are printed on them. Where necessary, some solid infill sections are added via modifiers.
I made some small tweaks to increase durability. After two years use, 12% infill turned out to be too weak without some additional solid sections. Total weight of one spool 199 g
The color change is done manually after the perimeters in the first layers are finished. Check where the perimeters are finished in the gcode with prusaslicer and insert the color change command manually in the gcode-file.
Be carefully! Sometimes, the perimeters are not printed in one go and you have to use color change commands again.
There is an active feature request on github, to implement an "Add color change after perimeters"-feature in Prusaslicer. This would make this so much easier and it would be very easy to implement. You can find a feature request here: https://github.com/prusa3d/PrusaSlicer/issues/2967
Layer height: 0.2-0.3 mm layer height
Layers: Main body without top/bottom layer. Modifiers are used to enforce 3 top/bottom layers for strength at the center.
Perimeters:' 2
Linewidth: default: 0.50 mm; perimeters 0.55 mm
Infill: ≥14 % honeycomb works well with PLA
Modifiers to introduce additional solid areas
License:
Creative Commons — Attribution — Share Alike
7
misterT
