February 8, 2023
Description
Most Altoids organizers have outside walls and are put in to sit flush in the tin.
My design gives more space for parts by deleting the outer walls and sits under the top lip of the tin.
I use this Design for Nozzles, which I have in multiple sizes (by far the most 0.4 mm), but the idea can be adapted to sort all kinds of things.
The structure sits tightly in place on the outside walls and the top lip of the tin prevents it from falling out.
To get the walls inside, they need to be bent in place slightly to clear the top lip
I got that little wrench a cutout, so it sits on top of the pars and is held in place by the lid when closed.
License:
Creative Commons — Attribution — Share Alike
8
Hisfantor
