November 20, 2022
Description
I am using a lot of these copper paint wire spools in different colours for my electronics projects. They are sometimes hard to use because they are very light and create a mess all the time rolling around…
Therefore i made this little wire spool holder which can hold up to 6 of these spools.
The wire of 2 spools each can be routed through a 3mm hole in the front of the holder part.
The spools itself have the following dimensions:
The spools are held in place to the holder with a screw (shaft Ø9.0mm) for each spool which are printed as well. Each spool can be fixed in place with the printed screw to avoid not wanted rolling of the spool.
You will need 2x M5x16mm metric screws to attach the base part to the holder part.
Printing instructions:
Happy printing :)
License:
Creative Commons — Attribution — Noncommercial
9
AWSW
