Portable Input Shaper (PIS) Mount (ADXL345)

This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host.

Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure resonance frequencies of the printer for different axes, and auto-tune input shapers to compensate for resonances. The mount uses adjustable glass bed clips to hold the sensor in place. The width available to clamp onto the bed is 8mm-9mm.

For additional information:  https://github.com/FYSETC/FYSETC-PortableInputShaper

Two (2) Clamps ( https://www.amazon.com/Printer-Adjustable-Compatible-Aluminum-Accessories/dp/B09NKV6H3H/ref=sr_1_11?keywords=adjustable%2Bglass%2Bbed&qid=1681931513&sr=8-11&th=1 )

Two (2) M3*8 screws

Note: Three versions:

1. Bed Mount
2. Bed and Sprite Mount
3. Sprite Mount

If you would like to buy me a cup of coffee.