Mini12864 LCD mount for Monoprice Select Mini

Replaced the mainboard with a different one and used the Mini12864 display for the project. 

There are two versions of the display. The Fysetc one has a longer reset button, and this one is designed for that one. If you use the BTT version of the Mini1286, it has a shorter reset button, so you will need to print a small cylinder and glue it onto the back of the reset pusher so it can reach the button.

You will need:

• 4 M3x6 screws to mount the display into the holder
• 4 M3x8 screws to mount the display onto the printer
• 4 M3 nuts for the above to screw into.

Find the Fusion 360 file below.