January 14, 2024
Description
Updates since initial upload:
| Date | Description |
| 02/23/2023 | Added a USB-A version, to fit 3rd party adapters. The USB-A version is ~2.3mm thicker, and has been tested for the GEEMEE charger. Thanks to Martin Th. for providing me with the dimensions, and the printing and testing. If anyone tries with a different 3rd party charger and it requires some tuning, let me know. |
| 02/10/2023 | Added a version of the HyperJuice Power Adapter clip for EU (with the attachment on the large side) |
| 11/11/2022 | Increased tolerance slightly so it prints better (at 0.1mm layer height the two parts could get stuck) |
| 10/27/2022 | I added a clip design for the HyperJuice charger |
| 10/26/2022 later | I uploaded the clip for Google's 15W USB-C power adapter. I updated the base of the case to fit on the clip. I also adjusted the vertical tolerance between the core and the ring of the case. |
| 10/26/2022 | Initial upload |
This new design for the Pixel Watch charger traveling case was inspired by retractable USB cable solutions. It makes for a compact and easy to use solution you can carry around.
Printing:
The case should be printed in place without any support. It is designed to be printed in place.
The power adapter clip I printed with support.
Assembly/disassembly:
Size comparison with the Pixel Watch charger travel case:
License:
Creative Commons — Attribution — Noncommercial
Félix
