October 21, 2023
Description
Here you have a cute pumpkin bowl, perfect to use in your halloween parties on any table you want.
Designed to fit almost any midsize printer, and needs less than 300g in total (at 100% scale).
full size (without lid) is about 110mm height, 180 wide and depht. You can choose between two face styles:
-happy
-scary
the lid just sits over, like the real ones. and you will need a little glue for the stem and lid union.
This is part “Seasonal Models Collection" and looks great next to the Wood Coffin Box
Print Settings
Material: PLA / PETG
Layer height: 0,20 mm
Nozzle diameter: 0,4mm or 0,6mm
Infill: 8-12%
Perimeters: 2
Supports: no
I tested with 0.6mm nozzle and 0.30mm layer height up to 130% scale and you dont need supports
You can see all my models here:
________________________
If you like my designs and want to sell physical prints or support me , you can check out my patreon for commercial license and exclusive models
https://www.patreon.com/meafdesigns
________________________
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
8
MEAFdesigns
