Apple Magsafe, Watch and Qi Charger 3-In-1

I have remixed this model to suit my needs a little bit more than the original available on Thingiverse. (Original)

The original used two magsafe chargers, but i wanted to reduce cost and had a spare CHOETECH Qi charger which is suitable for charging airpods or small QI devices. 

I adjusted and reworked the model to fit the wireless charger as well as added a thicker and stronger base and a cable channel at the back.

The Qi charger you will require is the CHOTECH Qi charger, measuring 9.1cm x 9.1cm x 0.85

You can find the same charger on Ebay HERE

I have also attached a blank base as well as the base with the additonal Magsafe charger.

• Printed at 0.2
• Printed on back orientation with manual supports. 
• 20% Infill Minimum (The more infill the heavier the base)
• 200c Temp
• 60c Bed
• PLA

Any questions please ask.