October 27, 2022
Description
I got a free tripod from a friend who was moving that had long ago lost its quick release plate. Finally got around to modeling up a replacement. The shape is loosely based on the Amazon Basics plate.
I used these 1/4-20 thumb screws but anything that has a ~6mm smooth shaft should work fine. After printing, screw the threads through the hole, it will be tight until it makes it through, then it will spin freely.
Printer:
Creality CR-6 SE
Rafts:
No
Supports:
No
Resolution:
.
Infill:
30% Gyroid
Filament:
Hatchbox PLABlack
Notes:
Designed to print with no supports or other adhesion additions.
License:
Creative Commons — Attribution
9
Seth
