DIN108 Dia Magazin Slide Feeder

There are different kind of Dia Magazine Slide Feeders out there.

Unfortunately, not all magazines use the same pitch.

Universalmagazin DIN 108 (Reflecta, Hama, Leica) uses 5.5mm pitch

Paximatmagazin (Braun, Revue) uses 5.04mm pitch

There are scanners that can only feed DIN108 magazines and it is not easy to transfer a Paximat magazine into a DIN108 magazine because of the different pitch.

So my solution here is a DIN108 magazine, but with a pitch of 5.04mm as is common with Paximat. So you can tilt Paximat magazines into this magazine and this magazine here will fit through the scanner as usual.

Print Settings

Rafts:

No

Supports: 

No

Resolution:

0.15mm

Infill: 

15%

Filament: Prusament PLA 
 

Notes:

Surprisingly, you can print this magazine on a Prusa i3 MK3S diagonally in one piece and WITHOUT support material!

CAD Model:

https://cad.onshape.com/documents/3396ab481ca0493095a2563f/w/ebf7ad976cd19b63ec427d9e/e/d16d144f6fab0a2a44a0bf96?renderMode=0&uiState=67b327433bc6fc509da3d9bb

Category: Camera