Raspberrpy Pi 3 Case - IKEA Enclosure

Hey guys, I designed this because my RaspberryPi3 got really hot in my enclosure, especially when printing materials that require high heat bed temperatures like ABS or ASA.

Therefore, I placed the Pi outside the enclosure which gave me most of the time about 60 °C CPU temperature of the Pi. To cool down even more I added the possibility to install a 30 mm fan which leads to CPU temperatures of ~40 °C while printing.

I have chosen one of the lower table legs as mount point like you can see on the pictures.

I also decided to make the walls thin enough that the LED of the Pi can shine through, so you can always see if it's on or not.

Happy printing, if you have any suggestions about improving it let me know.

Print instructions

Supports: On print bed only