This is a simple tri-glide webbing slide for 1" webbing. There is a threaded and no-thread version.
Update: versions are also available for 30mm, 1.5", 50mm.
Design parameters:
- The webbing slots are sized for 1" webbing (actual width is 27 mm)
- The pass-through slot on the no-thread version is slightly offset for easier installation
- All edges are chamfered for smooth handling
Selecting a version:
- Threaded: The webbing must be threaded through (or sewn on, depending on how you are using it). This is a good option for a permanent installation.
- No-thread: This has a slot in the middle bar so you can put it over an existing strap without disassembling it. This is a good option when you can't unthread an existing buckle that's in the way, or for when you want to be able to remove it easily.
Printing tips:
- Print as-oriented in the .stl files
Safety notes:
- Do not use this in a safety-of-life application.
- This piece is a choking hazard for small children.
Other notes:
- My design is fully parameterized; if you'd like a modification (such as different webbing width), please message me and I'll be happy to help!
Adam
