Wheel for RC 1/10 Car

This is a fully printable wheel for 1/10 scale model cars (12mm hex).

The wheel after printing is roughly 69mm in diameter and the tire is 3mm thick (low profile). I have included the other dimensions in the photo. 

I used PLA in aluminum color to print the rim, while for the tire I used black TPU 40D. 

For rim:

-Nozzle: 0.4mm 

-Layer Height: 0.2mm

-Wall Line Count: 3

-Infill: Min 20%

-Support: Yes

For tire:

-Nozzle: 0.4mm 

-Layer Height: 0.2mm

-Wall Line Count: 3-4(depends on how hard you want it)

-Infill: 0%

-Support: No

-IMPORTANT!: Top and bottom layers must be 6 or more (Otherwise, the outside of the tire will stick too weakly to the inside of the tire.)

In the future, I plan to make more types of tires and rims backward compatible with each other. 

Enjoy printing.