Bambu Lab X1 Next Gen. Purge / Flush / Poop Bin

This is the enlarged version of my other Poop-Bin: 
https://www.printables.com/model/285625-bambu-lab-x1-larger-poop-bin

in practical Use, it showed up that a larger Size is useful, and this time we go to the maximum size we can print. 

The slicer Options must be used with care, for example Tree-Support will not work (See last picture). At least some critical support is needed to print this version. If have added some slicer files.

There are 2 improvements:

1. Increased the height
2. Made a cut to allow Filament rests to fall inside.
3. Much stronger Floor and stronger walls

Printing time is here about 20 hrs. at 100% Speed, using “Fine Mode” and 3 Colors. The Printing time can possibly be reduced with optimized settings (Medium fine mode and adaptive Layer height) and using only 1 color. 

HINT: This Object is perfect to use your “Filament Rests Spools” for it. 

If the Filament is over, the Bambu will bring up a message and you can just insert the next “Rest”. As result you will get a multicolor-Bin like this one here (see pictures).