July 10, 2023
Description
But wait there's more!! You can't have just a knob, you need a drawer pull too!
Model is designed with 3" on center holes in mind. If other size are needed let me know.
This was modeled in Fusion 360 and then the logo added in Tinkercad.
Was printed on a Bear Prusa Mk3S with a Revo Six with a .40 nozzle at .20 speed layer.
I would suggest .40 nozzle for the detail involved with the logo. If you are creative you could also do MultiColor with this as well.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Joe3D
