MECHANICAL KEYBOARD - 68 KEY - 65%

Please check out the assembly tutorial for this project: 

Update 10/31/2022: Added ISO layout plate version.

This keyboard is a revision of a 3D printed Keyboard originally designed my Thingiverse user Fumbucker: https://www.thingiverse.com/thing:3010436

This build uses a Teensy 2.0 and QMK firmware. If you would like to flash the included firmware, make sure your wiring matches the included wiring diagram.

You will need:
1 - Teensy 2.0
68 - 1N4148 Diodes
68 - of your favorite mechanical keyboard switches
A compatible keycap set
3 - 2unit plate mount stabilizers
1 - 6.25 plate mount stabilizer for the spacebar
1 - USBC Breakout board
8 - 12mm M3 bolts
8 - 20mm M3 bolts
16 - M3 nuts
Some wire and maybe some rubber feet for the bottom

3D PRINTING SETTINGS

Material: PLA
Infill: 20%
Layer Height: .2mm
Supports: No