Kill la Kill Bracelet (magnetic) and Glove Decorations

Bracelet printed in two halves which are held together by neodinium magnets (3mm thick and 9mm in diameter) embedded in one of the halves and in tiny stubs which are pressure fitted in the other half. Add pause in respective layers when printing and add the magnets while keeping in mind the orientation of the poles (THIS PART IS REALLY IMPORTANT). The triangle is a separate piece but it slots on top of the bracelet with the two square holes on each piece. 

For the finger decorations you can either glue them on whatever glove you get or if you happen to buy the same one I did, you can use short M3 screws and use the holes in the glove to perfectly attach them. There are holes in the bottom of the piece to screw them in. You could use all 4 holes but it's more than enough with just two screws on opposite corners for each piece. 

Feel free to ask any questions.