November 3, 2022
Description
My wife has a house plant that would seep out the bottom and cause water damage to any surface that sat on so I created this plant tray. The insight supports are approximately 5mm above the surface, the bottom surface is approximately 5 mm, with a total dimension of 190mm by 190 mm by 10 mm.
This was designed in PrusaSlicer, the renderings for some reason do not appear correct however the photos are the output from my printer (the tray not the pot).
This was printed on a Prusa MK3S+, using PLA on the Smooth steel sheet print bed, with 10 grid infill, using a .4mm nozzle and .3mm layer height.
License:
Creative Commons — Public Domain
yanky79
